hu  |  en

Details


RADIOGRAPHY (X-RAY)  |  Industrial X-ray Tubes, Generators & Controls


Portable X-ray Unit 200 kV Panoramic Tube Head, air cooled
The ERESCO 32 MF4-C is a 200 kV constant potential portable X-ray tube head using state of the art switching technology with high radiation output allowing shortest exposure times thereby increasing productivity. GE Measurement & Control Solutions uses the number 32 to identify the superior penetration performance of its portable X-ray unit line. This means the ERESCO 32 MF4-C is capable of penetrating 32 mm (1.26”) Fe with a 2.0 density after a ten-minute exposure using AGFA STRUCTURIX D7 film @ 700 mm (27.5”) FFD.
Portable X-ray Unit 200 kV Panoramic Tube Head, air cooled

The X-ray tube head consists of a sturdy metal-ceramic X-ray tube and high voltage generator integrated into a rugged compact housing. The air-cooled 200 kV/ 600 W end-grounded X-ray tube is thermally protected for extended life.

The high voltage generator generates high-stability constant potential voltage at higher efficiency than conventional line frequency equipment.

The performance of the X-ray tube and the high voltage generator is continuously monitored for protection and operational safety. An on-board real time clock facilitates fully automatic warm-up routines for optimized and time-saving tube conditioning. The flexible connecting cable is heavy-duty and light weight.

Additional Features

• Rugged construction with proven reliability

• Gas insulated high voltage section reduces size & weight

• End-grounded, metal-ceramic X-ray tube

• DC voltage operation

• Modern power electronics provides high stability

• On-board real time clock supports fully automatic warm-up

• Extended operating range from 5 kV to 200 kV enables flexible use

• Large 40° x 360° emergent beam

• Optimized air-flow cooling for efficient heat dissipation

• 100% duty cycle at 30° Celsius (86° F)

• Built-in fail-safe warning lamp

• CE certification according to EMC and Low Voltage Directives

• French Standard NFC 74 100 compliant

• Water / dust resistant in accordance with protection class IP65

• Produced under ISO 9001 certified quality management system

Technical data

X-ray tube type

200 kV metal-ceramic with Tungsten (W) cone anode

kV range

5 - 200 kV (acc. to rating chart)

Target angle

22°

Inherent filtration

0.4 mm Fe/Ni/Co + 2 mm Al

Emergent beam

40° x 360°

Focal spot size (EN 12 543)

0.4 x 4.0 mm

Tube current

0.5 - 10 mA (3.0 mA /200 kV)

Anode temperature, max.

100°C

Current and voltage stability

± 1%

Continuous rating

600 W

Duty cycle (δamb = 30° C)

100 %

Power input, max.

1.0 kVA

Weight

31 kg (68.3 lbs)

Tube head diameter

160 mm (6.3“) (without rings)

Protection class

IP65

Termkékleírás PDF formátumban!
Árajánlat kérése