hu  |  en

Details


RADIOGRAPHY (X-RAY)  |  Industrial X-ray Tubes, Generators & Controls


Portable X-ray Unit 200 kV Directional Radiating Tube Head, air cooled
The X-ray tube head consists of a sturdy metal-ceramic X-ray tube and high voltage generator integrated into a rugged compact housing. The air-cooled 200 kV/ 600 W end-grounded X-ray tube is thermally protected for extended life. The high voltage generator produces high-stability direct voltage at higher efficiency than conventional line frequency equipment.
Portable X-ray Unit 200 kV Directional Radiating Tube Head, air cooled

The unit is designed for radioscopic applications respectively for applications with CR / Film where geometric enlargement is required.

The performance of the X-ray tube and the high voltage generator is continuously monitored for protection and operational safety. An on-board real time clock facilitates fully automatic warm-up routines for optimized and time-saving tube conditioning. The flexible connecting cable is heavy-duty and light weight.

 

Additional Features

• Rugged construction with proven reliability

• Gas insulated high voltage section reduces size & weight

• End-grounded, Be-window, metal-ceramic X-ray tube

• DC voltage operation

• Modern power electronics provides high stability

• On-board real time clock supports fully automatic warm-up

• Extended operating range from 10 kV to 200 kV enables flexible use

• Large 40° x 60° emergent beam

• Optimized air-flow cooling for efficient heat dissipation

• 100% duty cycle at 30° Celsius (86° F)

• Built-in fail-safe warning lamp

• CE certification according to EMC and Low Voltage Directives

• Water / dust resistant in accordance with protection class IP65

• Produced under ISO 9001 certified quality management system

• Also available as water-cooled version ERESCO 200 MF4-RW

Technical data

X-ray tube type

200 kV metal-ceramic with Tungsten (W) anode

kV range

10 - 200 kV (acc. to rating chart)

Target angle

20°

Inherent filtration

0.8 mm ± 0.1 mm, Be

Emergent beam

40° x 60°, elliptical

Focal spot size (EN 12 543)

1.0 mm (~0.5 IEC 336)

Tube current

0.5 - 10 mA (3.0 mA /200 kV)

Anode temperature, max.

100 °C

Current and voltage stability

± 1%

Continuous rating

600 W

Power input, max.

1.0 kVA

Weight

26.8 kg (59.1 lbs)

Tube head diameter

160 mm (6.3“) (without rings)

Protection class

IP65

Operating Temperature

-20°C to +50°C

Storage Temperature

-30°C to +80°C

Termkékleírás PDF formátumban!
Árajánlat kérése